TADF OLED emitters, introduction and market status - Page 4

Researchers from the Polish Academy of Sciences (PAS) and from the Silesian University of Technology have developed new OLED emitter materials based on aromatic electron-donating and -accepting moieties bridged by an antiaromatic seven-membered ring.

The researchers say that the new design of its N-doped PAHs is very flexible, and their properties are very responsive to the choice of the electron-accepting group. The researchers can thus can tune the emission mechanism between TADF emission and room temperature phosphorescence (RTP) emission, which gives high degree of control over the emission profile.

Second-generation OLED phosphorescence emission features an internal quantum efficiency of almost 100% - which would normally mean you cannot get more efficient than that.

As Kyulux explains in a recent post, though, phosphorescent suffers from a wide emission spectrum. In order to achieve a good color gamut (for which as narrow-spectrum emission as possible is best) display makers have to filter out the "tail" of the emission. This results in reduced brightness and efficiency.

Kyulux gave a very upbeat presentation at SID Displayweek, during which it updated on its latest material specification and its commercialization plans.

Kyulux managed to increase the lifetime of its Hyperfluorescence emitter systems (which features an IQE of 100% and a narrow emission spectrum) quite dramatically in the past year its green material now offers a lifetime of 59,000 hours (LT95@1000 nits, top emission), while the red material is at 20,000 hours. The blue material has also increase from280 hours to 450 hours in the past year.

UK-based SolOLED secured 200,000 GBP (almost $250,000 USD) in new funding from Scottish Enterprise to commercialize its novel OLED TADF emitter materials. SolOLED is launching a collaborative research project with CENSIS to commercialize the materials.

SolOLED was established in 2021 in the UK, to develop a family of novel solution-based TADF OLED emitter, based on technology that originated from the University of St. Andrews.

Poland-based TADF developer Noctiluca went public at the Polish NewConnect stock exchange last week. The company now trades under the NCL ticker.

Noctiluca did not raise any funds in this IPO, as it has no need for more funds at this stage, but this move will enable some stock holders to realize their funds and other to join as stakeholders in the company.

Poland is aiming to become a major innovation and high-tech hub, and the country is already enjoying a growing industry, focusing on IT, bio-technology, robotics and nanotechnology.

Poland has a strong material science and development expertise, and in recent years we have been seeing OLED and display-related ventures out of Poland. It seems Poland is poised to become an interesting location to watch for future innovation in the OLED industry.

Ergis Group noDiffusion OLED encapsulation film

One such company is the Poland-based Ergis Group, a leader in plastic processing active in markets such as food packaging, industrial, automotive, medical and more. In 2020, Ergis launched its first product for the optoelectronic applications (such as the display market and photovoltaics) - the Ergis noDiffusion films for flexible OLED panels (both displays and lighting) and OPVs. Ergis is using a unique ALD-based technology that enables it to offer high performance films on low cost PET films.

In recent years, we have seen accelerated OLED materials development, aided by software tools based on machine learning and Artificial Intelligence. This is an excellent development which contributes to the continued improvement in OLED efficiency, brightness and lifetime.

Kyulux's Kyumatic AI material discover system

The promise of these new technologies is the ability to screen millions of possible molecules and systems quickly and efficiently. Materials scientists can then take the most promising candidates and perform real synthesis and experiments to confirm the operation in actual OLED devices.

Notion Systems is a leading supplier of industrial ink jet printing systems. The n.jet inkjet platform from Notion Systems is used to produce printed circuit boards, OLED & QLED displays, sensors and high-quality 3D parts.

We present the following interview with the Company's CEO and founder, Dr. Michael Doran.

Q: Hello Michael. Can you detail notion systems' offering for the OLED industry? We understand you offer R&D and production systems, for both RBG printing and TFE printing.

Notion Systems offers a system platform called n.jet display series that prints functional layers at various steps of display production and for a range of display technologies. These include rigid, flexible, OLED, QLED and micro displays. The platform meets the most stringent requirements for process environment and process stability.

Hyperfluoresence emitter system developer Kyulux announced that its green material is getting close to commercialization. The company is now working closely with OLED makers, preparing for early adoption.

Kyulux says that its green emitter has not only met the required performance of OLED panel makers, in terms of efficiency, lifetime and driving voltage - but has actually surpassed the performance of green phosphorescent emitters in top emission devices. The green HF device achieves higher current efficiency, longer lifetime and offers a narrow emission spectrum and can thus enable better chromaticity.

During SID Display Week 2021, Kyulux detailed its latest TADF material performance. The red and green materials are "close to commercialization", and the company reports "excellent progress" with its blue emitter.

Using simulations, Kyulux shows how its Hyperfluorescence system is more efficient than a comparable phosphorescence emitter. While both emitters feature pretty much the same EQE, the narrow spectrum of the HF system which results in higher light intensity and can enable more efficient displays - by around 10%, according to Kyulux.